Dry type transformer
Our company produces the SC(B)9,SC(B)10,SC(B)
11 power transformers for domestic early coil around the injection licensed product model certificate of
low-noise-low-loss resin dry-type transformer.Due to the advanced design,quality materials,scientific formulas,rigorous process and high
standards of testing,the product has the following characteristics:
1.The high voltage winding of copper wire,low voltage winding wound of copper wire or copper foil,glass fiber
mat is filled with wrapping,vacuum packing of the epoxy used without casting,curing to form a solid cylindrical
overall,mechanical high strength,partial of small,high reliability.
2.Antiflaming,anti-explosion will not pollute the environment,Glass Fibre Coil wingding coil such with
self-extinguishing properties,and will not produce electric arc for
short-circuit,does not produce toxic or harmful gases in high temperature condition.
3.The coil does not absorb moisture,core clamps have a special corrosion protection layer,
100%relative humidity and other harsh environment,interrupt driving need not remove tide treatment.
4.Short circuit resistant and high level of lightning impulse
5.The resin inside and outside the coil is thin,heat dispersion is good.Cooling air is used air cool in
nature(AN).For any degree of protection transformer,equip with air-cooled system(AF),in order to improve overload capacity of short-term,and ensure safe operation.
6.Lower consumption,energy-saving.Running for a savings,can be maintenance-free.
7.Small volume,light weight,small area,lower installation costs,not need to consider oil tank,fire protection and
backup power,stand-by UPS.
8.Because there was no fire and explosion danger,installed in the load center can be distributed and fully close
to the power point,thus reducing the line low cost and save the expensive facilities costs.
of dry-type transformers in the best performance products,especially for urban airports,underground power station,laboratory,combined substation and other important places