Bulk metering unit
The bulk metering unit mainly consists two parts, combined transformers and watt-hour meter there. The former is made up to two or three single-phase voltage transformer and current transformer, which adopts 25# transformer special oil as insulation medium and whose primary and secondary line ends are both installed one panel by porcelain bushing.
Watt-hour meter tank is fixed on the flank of combined transformer and comprises one active metering meter and reactive KWH meter, which has high precision measurement, light weight, convenient and low lose functions.
This outdoor power metering unit is applicable to 3 phase and 50Hz, 6kV up to 40.5kV power grid. The products are widely compliance with relating IEC/ANSI international standard.
1. Using condition
Ambient temperature: -40℃~+85℃, day temperature difference: 25℃； Altitude:≤3000m area;
Wind speed no exceeds 35m/s; No normally intensity vibration
No intensity erosion gas, medium place (for example acid, alkali, smother eg.) Pollution class: IV class;
Charge temperature -40℃~+85℃。
2. Technical parameter
Current Ratio (A)
Insulation level (kV)
3. Wiring principle
4. External form diagram of electric meter tank